I have a 69 reg GLA which was purchased from new in Feb 2020. I bought an SD card from eBay for the Sat Nav which worked perfectly until today. I have an error message as follows
Production Check
Please eject Garmin map Pilot SD card and verify that the write protection switch is in the unlocked position.
I removed the SD card and have ensured the switch on the left hand side of the card is in the right position but as I had not touched the card before this error message came up then there was no reason for it to be incorrect. I am still getting the same error message. Can anyone advise me please?
Production Check
Please eject Garmin map Pilot SD card and verify that the write protection switch is in the unlocked position.
I removed the SD card and have ensured the switch on the left hand side of the card is in the right position but as I had not touched the card before this error message came up then there was no reason for it to be incorrect. I am still getting the same error message. Can anyone advise me please?